Driving can become quite stressful, especially when you get caught in heavy traffic. It can even be more nerve-wracking if you unexpectedly have car troubles or when your vehicle breaks down. Fortunately, there are dependable towing companies, such as www.sanjosetowservice.com, to provide roadside assistance.
What Is Roadside Assistance
Roadside assistance is a service that is designed and intended to help motorists get their vehicle going again when it breaks down. When you contact your service provider for roadside assistance, they will typically try to help you resolve the issue through the phone. If the problem cannot be solved over the phone, they will send a tow truck or a roadside contractor to transport your vehicle to the nearest auto mechanic in the area.
Since getting into car trouble can happen at any time when you are on the road, it is essential that you already have the contact information of a reliable towing company in your area, not only to be prepared when and if you will have car troubles but to also make certain that you get professional and quality service, where they also handle your vehicle with great care. When in San Jose, check out www.sanjosetowservice.com.
Listening To Music While Behind The Wheel
As mentioned earlier, driving can be stressful. Even the most experienced driver can experience stress at times when they are behind the wheel. When one is stressed, this can ultimately affect the heard. But researchers have confirmed that there is one simple thing that you can do so as to avoid stress while driving – listening to the proper kind of music. Apart from reducing stress, listening to your favorite music can also help you stay focused and alert as you drive.
Listening to music while driving can also improve your mood as well as your driving performance. Music helps produce feel-good hormones which can improve one’s mood and performance. Research have discovered that listening to your favorite tunes while you are behind the wheel can prompt safe behavior, improve mood, lower the rate of breathing, decrease the stress and aggression of drivers, as well as help in keeping them focused.
Many owners of guitars that have “seen-better-days” want to give their instrument a paint makeover, but are worried about not getting the best finishing results. The most common DIY guitar-painting suggestion they’ve come across is to wet sand the wood before applying the final lacquer coating. That way, they will be able to achieve a flat glass-like finish as opposed to a dull lacquered look.
While many have read and heard about sanding before applying paint on wood as a way to achieve smoothness, using a wet sanding process is something unfamiliar to a lot of DIYers.
What Exactly is Wet Sanding?
Wet sanding is a method of smoothing out the wood surface using a special type of sandpaper with extra-fine grit of 1000 – 2000, which can be soaked in water without losing form. They are special because the abrasive materials are attached to a film or cloth backing instead of paper.
The sturdier backing also makes the sandpaper reusable several times even when wet. Furthermore, a wet sandpaper can efficiently wash away abraded lacquer particles as it can also absorb and then rinse off the white crud produced by sanding.
Wet sanding as opposed to dry sanding requires moving in a straight line while alternating directions with each sweep. The purpose of which is to sand off any scratches created by the previous passing. Moreover, wet sanding requires only light strokes since the main purpose is to remove scratches and any hardened lacquer residue before applying the final lacquer coating; usually a week after the last clear coating. .
If performed correctly, wet sanding will leave the guitar wood material without visible scratches, creating a surface so smooth it will attain a mirror-like finish after the final lacquer coating. While wet sanding seems like a messy process, it actually isn’t because it eliminates the production of dust particles.
Are Random Orbital Sanders Usable for Wet Sanding?
The good news is that there are now random orbital sanders specifically designed for wet sanding, as well as wet sanding discs with up to 2000 grits of film-backed sandpaper, usable for both dry and wet sanding.
A random orbital sander built as a pneumatic water sander has an inlet joint to which an accompanying 1” water tubing or pipe can be attached; allowing water to flow from source to the wood surface at controlled amounts. Random orbital sanders are already ideal when looking to achieve an ultra-smooth surface before applying finishing touches. Even more so for wet sanding because the circular motion automatically changes direction when hitting an uneven or irregular surface, to avoid going over the same area repeatedly in a single direction.